This ATR 72 engine was inducted to Standard Aero for a minor work scope and released on July 16, 2016 after the following work was carried out: Turbine Section Repair, Fuel Nozzle Overhaul, Main / Scavenge Oil Filters Replaced, Flow Divider Bench Check, Compressor Wash and Long Term Preservation. The engine accessories were functionally checked during the engine test.
This ATR 72 engine has operated 421.1 hours and 692 cycles since its last repair and will be delivered freshly converted to PW127F configuration with an 8130 Dual Release.
Contact your Regional Sales Manager at C&L Aerospace for more information.
The information contained in this document has been provided by C&L Aerospace, LLC and is accurate to the best of their knowledge. C&L Aerospace, LLC is not liable for any errors which may be contained in this document. Parties interested in the products shown in this document are responsible for verifying the accuracy of all subject matter.
|LSV Date:||July 12, 2016|
|Item||Part Number||CSN||Life Remaining|
|HP Centrifugal Impeller||3072766-01||7,369||7,631|
|LP Centrifugal Impeller||3072764-01||7,369||7,631|
|2nd Stage PT Disk||3033914||23,946||6,054|
|1st Stage PT Disk||3038513||22,092||7,908|
|HPT Front Cover||3039640||2,097||12,903|
|Air Interstage Seal||3039639||8,037||6,963|
|HPT Rear Cover||3039639||7,369||7,631|
|Reduction Gearbox||June 2012||3,606.4||7,369|
|Hot Section Inspection||June 2012||3,606.4||7,369|