This engine was inducted to Standard Aero for a minor work scope and released on June 8, 2016 after the following work was carried out: LCF Replacement, Compressor BSI, Fuel Nozzle Overhaul, Main / Scavenge Oil Filters Replaced, Flow Divider Overhauled, Compressor Wash and Long-Term Preservation. The remaining engine accessories were functionally checked during the engine test.
This engine has operated 1,916.8 hours and 3,344 cycles since its last repair and will be delivered with an 8130 Dual Release.
Contact your Regional Sales Manager at C&L Aerospace for more information.
The information contained in this document has been provided by C&L Aerospace, LLC and is accurate to the best of their knowledge. C&L Aerospace, LLC is not liable for any errors which may be contained in this document. Parties interested in the products shown in this document are responsible for verifying the accuracy of all subject matter.
|LSV Date:||June 8, 2016|
|Item||Part Number||CSN||Life Remaining|
|HP Centrifugal Impeller||3072766-01||13,295||1,705|
|LP Centrifugal Impeller||3072764-01||7,468||7,532|
|2nd Stage PT Disk||3033914||13,295||16,705|
|1st Stage PT Disk||3038513||13,295||16,705|
|HPT Front Cover||3039640||13,158||1,842|
|Air Interstage Seal||3039639||12,161||2,839|
|HPT Rear Cover||3039639||13,295||1,705|
|Reduction Gearbox||Feb. 2010||8,229.9||13,295|
|Hot Section Inspection||July 2014||3,786.1||7,468|